WetRag

Heat Blocking Putty

This reusable heat blocking putty keeps piping and sensitive components cooler than traditional wet rag applications during brazing, soldering, or welding. It is made from the same materials found in the heat shield of the space shuttle. Simply apply, remove, and reuse.

  • Reusable up to 40 Times
  • Withstands Temperatures over 2000 °F
  • Blocks Direct and Conductive Heat
  • Indicator Dye Fades as Product Wears Out

Part # RT400P
Size: 12 oz

Where to Buy

How It Works

  1. Turn off or disconnect all power
  2. Mold as much putty to the surface as you can for maximum protection
  3. Welding technics and applications will vary. Use additional safeguard materials to protect if necessary. Use low flame and flow nitrogen for added protection.
  4. Braze, solder, or weld.
  5. Allow surfaces to cool.
  6. All Done!

Values

Coming soon.

FAQ

What is Viper WetRag, and what are its capabilities?

Viper WetRag is a reusable, moldable heat blocking putty designed to protect nearby components from heat damage during brazing or soldering. It is an alternative to traditional wet rags and stays in place on vertical and overhead surfaces without dripping. Viper WetRag absorbs and dissipates heat from torches, shielding valves, sensitive electronics, or painted surfaces from thermal damage. It can be reused dozens of times and is ideal for HVAC/R, plumbing, and fabrication applications where precise, localized heat control is required.

How do I use Viper WetRag, and what is the proper way to apply it?

To use Viper WetRag:
  1. Remove the putty from the tub and knead briefly until pliable.
  2. Mold the putty directly around or behind the area to be protected (e.g., valve body, painted panel, pipe insulation).
  3. Ensure full contact with the surface to maximize heat absorption.
  4. Perform brazing or soldering as usual, keeping flame away from the putty when possible.
  5. After cooling, remove and return the putty to its container for reuse.

What surfaces or materials is Viper WetRag compatible with?

Viper WetRag is compatible with all standard metals used in HVAC and plumbing systems, including copper, brass, steel, and aluminum. It can also be applied to most plastics, insulation, and painted surfaces without staining or residue. However, do not use on live electrical parts or exposed electronics unless they are fully de-energized.

What troubleshooting tips apply to Viper WetRag?

If the putty becomes dry or brittle, knead it briefly with wet hands or wrap it in a damp cloth to restore pliability. Ensure it fully contacts the protected surface to avoid air gaps that reduce its effectiveness. Do not expose the putty to direct flame for extended periods: it's designed to block heat, not replace a flame guard.

Are there safety or regulatory considerations for Viper WetRag?

Viper WetRag is non-toxic, non-flammable, and safe to handle without gloves, though hand protection is recommended during high-temperature work. It does not contain asbestos or fibers and produces no harmful fumes. Always store with the lid closed to prevent drying. Do not ingest. Discard and replace if it becomes excessively contaminated with flux, metal shavings, or burnt residue.