WetRag HeatShield
Flame-Resistant Pad
Viper WetRag® Heatshield is a revolutionary flame-resistant welding pad designed to prevent fires and protect sensitive components from heat transfer damage. Made from high temperature fire resistant absorbent carbon with a woven core of fiberglass, this versatile HeatShield can be used wet or dry and protects wood, insulation, studs, walls, flooring, valves, painted surfaces, metal, pipe, and other components or surfaces from damage. WetRag® HeatShield is machine washable and safe to dry.
- High Temperature Resistant to 2500°F
- Protects from Fires and Heat Transfer Damage
- Can be used Wet or Dry
- Reusable and Machine Washable
Part # RT420H
Size: 12 x 12 (30.5cm x 30.5cm)
How It Works
- Turn off or disconnect all power.
- For your safety always wear proper PPE, welding clothing, safety goggles, and face shields.
- Prepare WetRag HeatShield. Soak in water for use in high temperature applications or use dry for lower temperature applications.
- Place HeatShield in required area to protect from flame damage, conductive heat transfer, or welding sparks.
- Solder, Braze, or Weld.
- Allow WetRag HeatShield and surrounding areas to cool.
- If used wet, hang dry or machine wash on low/delicate separate from other laundry. Dry on normal cycle separate from other laundry.
Recommended Products
View all productsValues
Coming soon.
FAQ
What is Viper WetRag HeatShield, and what are its capabilities?
Viper WetRag HeatShield is a flame-resistant welding pad designed to prevent fires and protect nearby components from heat damage during brazing, soldering, or welding. Constructed from high-temperature carbon-based absorbent layers with a woven fiberglass core, it can withstand temperatures up to 2500°F (1371°C). It is reusable, machine washable, and can be used dry or pre-soaked in water depending on application needs. It is ideal for shielding wood, insulation, valves, walls, or finishes near the heat source.
How do I use Viper WetRag HeatShield, and what is the proper application method?
- Disconnect system power and wear proper PPE including safety goggles and flame-resistant gloves.
- Soak the HeatShield in water for enhanced protection during high-temperature operations, or use dry for lighter-duty heat shielding.
- Place the pad securely over or behind the area to be protected (e.g., walls, studs, valves).
- Proceed with brazing, soldering, or welding as required.
- Allow the pad to cool before handling.
- Clean after use by hanging to dry or machine washing separately on a delicate cycle. Tumble dry alone.
What surfaces and systems is Viper WetRag HeatShield compatible with?
Viper WetRag HeatShield is compatible with HVAC, plumbing, electrical, and welding tasks. It protects wood framing, drywall, insulation, copper and steel tubing, painted surfaces, and control valves from flame and radiant heat exposure. It is safe for use near refrigerant lines and service ports, and provides a flexible barrier that conforms to irregular surfaces.
What troubleshooting tips apply to Viper WetRag HeatShield?
Always ensure full coverage of the protected area; adjust or overlap pads if necessary. Wetting the pad prior to use improves heat-blocking ability in prolonged applications. Allow the pad to cool completely before re-use or storage. Inspect regularly for damage, burns, or thinning that may reduce effectiveness.
Are there safety or regulatory considerations for Viper WetRag HeatShield?
Viper WetRag HeatShield is non-toxic and safe to handle, but should always be used with standard safety precautions during hot work. Do not allow the pad to contact direct flame for long durations. Store it in a dry place between uses. For extended lifespan, keep it clean and free from flux or slag build-up. It is machine washable and designed for repeat use, offering a reliable and safer alternative to disposable wet rags or makeshift heat shields.

