Strike Bac® Disinfectants

Lemon and Spearmint

These EPA Registered products are used to disinfect and clean all surfaces and rooms that may contain harmful viruses, bacteria, and other health hazards. Great for any hard surface from the ceiling to the floor. Excellent for cleaning food contact surfaces and sanitizing restrooms.

These disinfectants are included on the new EPA list of disinfectants for use against SARS-COV-2, the novel coronavirus that causes the disease COVID-19.

EPA Covid-19 Approval Here

  • EPA approved for use on COVID-19
  • Disinfects and Sanitizes food surfaces and restrooms
  • Non-Corrosive
  • Aluminum safe for HVAC/R coils and components

Part # RT01110 (Spearmint) & RT01131 (Lemon)
Size: Gallon

Where to Buy

How It Works

  1. To disinfect inanimate, hard non-porous surfaces, add 4 ounces of Strike Bac Odor Disinfectant per gallon of water. Apply solution with a mop, cloth, sponge, hand pump sprayer or low pressure sprayer so as to wet all surfaces thoroughly. Allow to remain wet for 10 minutes then remove excess liquid. For sprayer applications, spray 6-8 inches from surface, rub with a brush, sponge or cloth. Do not breathe spray mist.
  2. For heavily soiled areas, a pre-cleaning step is required. Prepare a fresh solution for each use.
  3. To disinfect restaurant food contact surfaces: countertops, appliances, and tables, add 4 ounces of Strike Bac Odor Disinfectant per gallon of water. For heavily soiled areas, a pre-cleaning step is required. Apply solution with a cloth, sponge, or hand pump trigger sprayer so as to wet all surfaces thoroughly. Allow the surface to remain we for 10 minutes, then remove excess liquid and rinse the surface with potable water.

Values

Coming soon.

FAQ

What is Strike Bac, and what are its capabilities?

Strike Bac is an EPA-registered disinfectant cleaner designed for use on hard, non-porous surfaces. It effectively eliminates bacteria, viruses, and fungi, including pathogens like SARS-CoV-2 (COVID-19). It comes in spearmint and lemon scents, which provide a pleasant aroma while ensuring thorough disinfection.

How do I use Strike Bac, and what is the correct application method?

To use Strike Bac:
  1. Ensure the surface is clean and free from visible dirt.
  2. Apply the disinfectant directly to the surface using a cloth, mop, or sprayer.
  3. Allow the surface to remain wet for the contact time specified on the product label (typically 10 minutes) to ensure effective disinfection.
  4. After the contact time, wipe the surface with a clean cloth or allow it to air dry.

What surfaces is Strike Bac compatible with?

Strike Bac is safe for use on a variety of hard, non-porous surfaces, including countertops, floors, walls, and equipment surfaces commonly found in healthcare, food service, and industrial settings.

What troubleshooting tips apply to Strike Bac?

Ensure that surfaces are pre-cleaned before application, as organic matter can reduce the effectiveness of disinfectants. Always follow the manufacturer's instructions regarding dilution ratios and contact times for optimal results.

Are there safety or regulatory considerations for Strike Bac?

Strike Bac is EPA-registered and complies with safety standards for disinfectants. While it is safe for its intended uses, always wear appropriate personal protective equipment (PPE) when handling the product, and ensure adequate ventilation during use.