Nylog Red
Gasket & Thread Sealant
Nylog Red is an elastic fluid made from synthetic refrigeration grade compressor oil. Nylog Red is fully miscible and compatible with mineral oil refrigerants and oils. Gaskets coated with Nylog will never dry or become heat fixed to the surface. Threaded connections coated with Nylog will block high pressure leaks by forming a hydraulic seal. Nylog can be used an assembly lube when installing shaft seals, o-rings, schraeder valves, ball valves, or other internal system components.
- Will not Contaminate Systems
- Seals Flares and Threaded Connections
- Lubricates O-Rings and Gaskets
- Approved by OEM Manufacturers
Part # RT200RP
Size 30ml
How It Works
- Turn off or disconnect all power
- Apply Nylog to gaskets, threads, or use as an assembly lube
- Tighten connections
- All Done!
Recommended Products
View all productsValues
Coming soon.
FAQ
What is Nylog Red, and what are its capabilities?
Nylog Red is a gasket and thread sealant formulated from synthetic refrigeration-grade mineral oil. It is designed for use with mineral oil-based refrigerants and oils, such as those found in systems using CFCs, HCFCs, and ammonia. Nylog Red creates a flexible, non-hardening seal that prevents leaks in gaskets and threaded connections.
How do I use Nylog Red, and what is the correct application method?
- Ensure the system is depressurized before application.
- Apply a thin layer of Nylog Red to both mating surfaces of the gasket or threads.
- Assemble the components as per manufacturer specifications.
- Pressurize the system and check for leaks.
What systems and components is Nylog Red compatible with?
Nylog Red is compatible with systems using mineral oil-based refrigerants, including CFCs, HCFCs, and ammonia. It is suitable for use on gaskets, flare fittings, threaded connections, and as an assembly lubricant for components like O-rings and valve seals.
What troubleshooting tips apply to Nylog Red?
Ensure surfaces are clean and free from debris before application. Avoid over-application, as excessive sealant can be displaced during assembly. Nylog Red remains tacky and does not harden, allowing for easy disassembly if needed.
Are there safety or regulatory considerations for Nylog Red?
Nylog Red is non-toxic, non-flammable, and NSF registered. It does not contaminate systems and is approved by OEM manufacturers. Always follow standard safety practices when handling and applying the product.
